DIY: Celine Inspired Knot Bracelet

 I have been lusting over the Celine Knot bracelet for months and have been extremely unlucky in finding it. I figured it was time to get over it by making something similar while hunting down other autumn necessities. Given my current color obsession I decided to get adventurous and not just go for a metallic version.

Inspiration
DIY Celine Inspired Knot Bracelet
(images from here and here )

My DIY version
DIY Celine Inspired Knot Bracelet
DIY Celine Inspired Knot Bracelet

You will need:

DIY Celine Inspired Knot Bracelet
- polymer clay
- a jar or thick glass bottle
- an oven (:p)
 - acrylic colors or spray paint (optional)

The jar or glass bottle will determine the size of the bracelet so pick one with a diameter close to that of your wrist. The temperature that you will bake it will not be so high as to break it but do pick a thick one.

Turn on your oven adjusting the temperature according to your clay's instructions.
Start by conditioning a piece of polymer clay and knead it until it is soft.
DIY Celine Inspired Knot Bracelet
Roll your clay into a tube approx. 1 inch longer than the diameter of your wrist. The tube can be as thick or thin as you want your bracelet to be. I have made both chunky and thinner versions that you can see in the pictures above. Grab the two ends and while handling the clay softly tie them into a loose knot. DIY Celine Inspired Knot Bracelet
Softly pull the two ends so that you tighten the knot.
DIY Celine Inspired Knot Bracelet
Get your jar and wrap the bracelet(s) around it.
Put the jar with the bracelets in the oven. The time you need to bake them depends on your clay's instructions so read the label beforehand.
DIY Celine Inspired Knot Bracelet

Carefully remove the jar from the oven and let the bracelets cool. Be careful not to touch them while hot and not to bend them while still warm.

Once they have cooled you can use acrylics or spray paint to color them. 

Celine Inspired Knot Bracelet

Celine Inspired Knot Bracelet

Hope you like them!
xoxo

8 comments :

  1. Υπεροχα!Και τα χρωματα φανταστικα:)

    ReplyDelete
  2. Oh yes, I do! I love these.
    So simple and so beautiful!!

    ReplyDelete
  3. what a cool bracelet. can they break easily if banged or is the clay pretty tough?

    ReplyDelete
    Replies
    1. I haven't tried banging it really but as long as you don't pull the ends apart it should be fine :) The clay is hard but given the shape, it can break if not taken care of properly.

      Delete
    2. Different brands of polymer clay have slightly different strengths. Sculpey III is usually the most brittle after baking. Premo Sculpey and Kato brands are both strong and flexible.

      Delete
    3. Thank you for the tip Kelsey :) I mainly use Cernit and Fimo and have no complaints so far. They both hold up pretty well.

      Delete
  4. Great!! :D

    Thanks for sharing!!xxx

    ReplyDelete